Nagman Instruments Consortium

Since 1972. Precision instrumentation. Flow and level measurement. Calibration systems and services.

Nagman Flow
Nagman Flow

NAGMAN / NAGMASS

Coriolis mass
flow meter

Direct mass flow, density and temperature measurement for batching, process control and liquid transfer.

NAGMASS Coriolis mass flow meter with integral blue transmitter and stainless-steel sensor

DIRECT MASS MEASUREMENT

Measure mass.
With confidence.

Choose a meter for the accuracy, flow range and fluid your process needs.

±0.1%

Mass-flow accuracy option

±0.05%

Corresponding repeatability

DN 3–300

NAGMASS family size range

Check out various applications for this sophisticated meter, learn about its working principle, technical specifications and required details for a quick quote

CRYOGENIC CORIOLIS MASS FLOW METER

Extreme cold.
High accuracy.

Measure liquid nitrogen and liquid oxygen by mass in cryogenic transfer and test systems.

LN₂
Liquid nitrogen
LOX
Liquid oxygen

−196 °C

Measures Reliably in low temperatures

±0.2%

High Accuracy for Critical research

01 / CORIOLIS MASS FLOW METER APPLICATIONS

What do you need to measure?

Explore mass flow measurement for research, marine operations, production and product transfer.

Flow meter for cryogenic service

Space research

Measure LN₂ and LOX supplied to ground-test systems and compare consumption between runs.

How it helps

Compare the mass of cryogen delivered to a test rig with what it consumes. Specify temperature, pressure and flow range for your system.

Mass flow meter for marine applications

Marine applications

Measure fuel received during bunkering and track engine and auxiliary-system consumption by mass, even as fuel density changes.

How it helps

Compare fuel received with onboard use to support voyage reporting and consumption monitoring. Match the meter to the fuel, flow range and installation conditions.

Flow meter for oil and gas

Oil & gas

Measure product by mass where density can vary between batches. Use mass totals to reconcile feeds and blended product.

How it helps

Measure feed and finished product on the same mass basis, including when density varies. Select wetted materials for the fluid and process conditions.

Flow meter for beverage batching

Beverage production

Meter syrup and concentrates by mass to keep blend ratios consistent. Select the sensor for the ingredient and cleaning requirements.

How it helps

Pair the meter with your batch controller to dose an ingredient to a mass target. Specify the process connection and cleaning cycle.

Mass flow meter for custody transfer

Custody transfer

Measure product handover by mass for loading, unloading and bulk liquid transfers, with clear totals for reconciliation.

How it helps

Compare delivered and received quantities on a mass basis. Review the complete metering system and any project or legal-metrology approvals required for the transaction.

Flow meter for food processing

Food processing

Dose milk, edible oils and other ingredients by mass. Hygienic connections are available for suitable processes.

How it helps

Set dose targets by mass for dairy, edible oils or other ingredients. Discuss drainability, cleaning and hygienic connections for your line.

Illustrative chemical storage tanks and liquid transfer piping

Mass flow meter for chemicals

Chemicals & petrochemicals

Measure feeds, solvents and additives by mass to keep process recipes and blending ratios consistent.

How it helps

Track material use and batch totals as product density varies. Select wetted materials for the chemical, concentration and operating temperature.

Illustrative pharmaceutical liquid preparation and vial filling line

Mass flow meter for pharma

Pharma & biotechnology

Dose liquid ingredients and monitor process feeds with direct mass measurement for repeatable production.

How it helps

Measure small ingredient additions and batch quantities with a meter sized for your flow range. Review hygienic connections, wetted materials and cleaning requirements for the process.

Illustrative paint mixing vessel and operator checking a color sample

Mass flow meter for paints and resins

Paints & resins

Meter resins, binders and liquid additives by mass to improve formulation consistency between batches.

How it helps

Keep ingredient proportions on a mass basis for blending and dosing. Size the meter for viscosity, operating temperature and available pressure drop.

THE CORIOLIS PRINCIPLE

A small phase shift.
A direct mass reading.

As fluid moves through the vibrating tubes, inlet and outlet sensors detect a timing difference. The transmitter uses it to calculate mass flow.

Mass flow
Timing difference between the sensor signals.
Density
Resonant frequency of the measuring tubes.
Temperature
Measured separately and used for compensation.

See the Coriolis effect

Adjust the flow to see how the signals shift.

Inlet sensorOutlet sensor
Medium flow · phase shift
The tubes vibrate even at zero flow. As flow increases, the time difference between the sensor signals grows.

WHY CORIOLIS

Why choose Coriolis?

Measure mass directly, verify repeatability and choose a sensor that fits your process.

DIRECT MEASUREMENT

Mass flow and density

Measure mass flow and density in the same instrument, with temperature and calculated volume flow also available.

ACCURACY

High accuracy

Choose ±0.1%, ±0.2% or ±0.5%  accuracy according to your requirement.

RELIABILITY

No moving parts

There are no rotating parts, gears or bearings in the flow path and provide minimal pressure drop and long life for instrument. 

INSTALLATION

Flexible piping

No dedicated straight runs for flow conditioning. Select mounting orientation and supports for the fluid, sensor and installation.

04 / ENGINEERING AT A GLANCE

NAGMASS technical specifications

Compare measurement performance, installation requirements and available outputs across the NAGMASS family.

Find a starting flow range by pipe size

±0.1% accuracy5,000–50,000kg/h
±0.2% accuracy2,500–50,000kg/h
±0.5% accuracy2,000–80,000kg/h

Micro-Bend liquid ranges. Confirm minimum, normal and maximum flow before choosing a model.

Measurement and performance
Nominal sizeDN 3–300
Mass-flow accuracy±0.1%, ±0.2% or ±0.5%
Repeatability±0.05%, ±0.1% or ±0.25%, respectively
Measured variablesMass flow, density and temperature. Volume flow is calculated.
Sensor designsU Series, Micro-Bend and Super Micro-Bend
Process temperatureIntegral −50 to +125 °C. Remote −50 to +200 °C. High-temperature remote −50 to +350 °C. Dedicated cryogenic configurations down to −196 °C.
Special optionsHygienic, cryogenic and insulated jacket
Construction and integration
Measuring tubesSS304, SS316L, Hastelloy or PTFE-coated SS316L
ConnectionsGB, DIN or ANSI flanges, custom threads or hygienic Tri-Clover
Nominal pressure16, 25, 40 or 63 bar. Up to 250 bar for selected sizes. Confirm pressure at operating temperature.
ProtectionIP65, IP66 or IP67, depending on configuration
Power24 V DC or 220 V AC
Outputs4–20 mA and pulse. RS-485 Modbus RTU or HART by selection.
CertificatesTest certificate or NABL calibration certificate

A LITTLE CLARITY

Good questions.
Clearer choices.

It measures mass flow from the phase shift of the vibrating tubes. Resonant frequency provides density, a sensor measures temperature and the transmitter can derive volumetric flow from mass flow and density.

±0.1% is a catalogue accuracy option for selected builds. Zero stability has a larger effect at low flows, so ask us to confirm the expected accuracy at your minimum, normal and maximum flow rates.

Yes. Cryogenic NAGMASS configurations are available for LN₂ and LOX, with published operation down to −196 °C. We confirm pressure, mass-flow range and accuracy for the selected build. For LOX we also review oxygen-service materials and cleaning requirements.

Coriolis measurement is an option for viscous liquids such as syrups and oils. Share the viscosity at operating temperature, your maximum flow rate and the pressure drop the line can tolerate so we can assess the right meter size.

Coriolis meters generally do not require prescribed straight runs upstream or downstream. The meter still needs suitable pipe support and an orientation that keeps the tubes full during liquid service. Review the space and piping layout with us before installation.

Review the fluid, flow range and transfer conditions with our team. The complete metering system and any legal-metrology approval or project verification required for the transaction must be assessed for the installation.

Start with your fluid, minimum, normal and maximum mass flow, operating temperatures and pressures, line size and required outputs. If you have an accuracy target or acceptance test, include it with your enquiry.

05 / FROM EXPLORING TO ENQUIRING

Your process.
Your starting specification.

Your application travels with you. Complete the details you know and our engineers can help with the rest.

Your NAGMASS enquiry

A conversation
with a head start.

Application
Choose an application
Process details
No process details added yet

    Request a Quote

    Tell us what you need to measure or calibrate. Share the essentials now; add technical details if you have them.

    Add technical details (optional)

    * Required. Your details will be used to respond to this enquiry.

    Request a Quote