Nagman Instruments Consortium

Nagman Instruments
Nagman Calibration
We are hiring kindly reach us at careers@nagman.com
Request a Quote
Request Quote

Level Meters & Transmitters Calibration / Verifications

Level Meters & Transmitters Calibration / Verifications

Nagman Flow provides expert calibration and verification services for a wide range of level measurement instruments. Accurate level sensing is critical for inventory management, process control, and preventing hazardous overflows in industrial tanks. Whether you use mechanical floats or advanced non-contact radar, our services ensure your transmitters provide precise data. We offer both laboratory-grade calibration and field verification to keep your storage and process vessels operating safely.

Key Features

  • Full-Span Verification: Testing at multiple points (typically 0%, 25%, 50%, 75%, and 100%) to ensure accuracy across the entire tank height.
  • Loop Calibration: Verification of the 4-20mA or digital (HART/Profibus) output signal to ensure your control room sees exactly what the sensor measures.
  • High-Precision References: Use of laser distance meters, calibrated tapes, or master electronic scales to provide traceable reference points.
  • Density & Temperature Correction: For hydrostatic level transmitters, we provide calculations to adjust for changes in liquid density and ambient temperature.
  • Detailed Documentation: Full calibration certificates provided, including "As-Found" and "As-Left" data for audit compliance.

Types of Calibrations / Tests Available

The calibration bench supports the following tests commonly required for meter validation:

  • Endurance Test – long-term durability validation
  • Accuracy Test – ensures measurement reliability
  • Orientation Test – performance across installation positions
  • Reverse Flow Test – behavior under backflow conditions
  • Static Pressure Test – strength under high pressure
  • Temperature Test – effect of varying fluid temperatures
  • Flow Disturbance Test – real-world installation simulation
  • Pressure Loss Test – head loss measurement
  • Position Change Test – accuracy after repositioning

Single Jet Water Meters

Multi Jet Water Meters

Multi Jet Water Meters

Electromagnetic Water Meters

Electromagnetic Water Meters

Ultrasonic Water Meters

Ultrasonic Water Meters

Automatic operation with Gravimetric principle

Automatic operation with Gravimetric principle

Suitable for DN 15 – DN 50 water meters

Suitable for DN 15 – DN 50 water meters

Complies with BIS 779 & ISO 4064

Complies with BIS 779 & ISO 4064

Capable of 9+ different tests

Capable of 9+ different tests

Meter Sizes DN 15 / DN 20 / DN 25 / DN 50
Flow Range Minimum 30 LPH to Maximum 7000 LPH (0.03 to 7 m³/hr)
System Operation Automatic
Method of Calibration Gravimetric
Number of Test Line Single
Calibration Media Water
Number of meters can be Calibrated at a time 5 Nos. of Water Meters of Size DN 15 (OR)
4 Nos. of Water Meters of Size DN 20 (OR)
3 Nos. of Water Meters of Size DN 25
Reference Meters 1 No. of Each Calibrated & Certified Electromagnetic Flow Meters of Sizes
DN 6 – Flow Range: 30 LPH to 1000 LPH (0.03 to 1 m³/hr) Accuracy: ± 0.5% of Reading
DN 25 – Flow Range: 800 LPH to 17000 LPH (0.8 to 17 m³/hr) Accuracy: ± 0.2% of Reading
Meter Clamping Pneumatic Clamping System
Compressed Air 6 bar through Oil free Compressor for Pneumatic Clamping & Pneumatic operated Valves
Flow Control Through VFD’s Connected to the Pumps & Electrically operated control Valves
Water supply – Through Pumps 10 m³/hr @ 16 Bar, 7.5 Kw / 3Phase/ 50Hz
Pressure Measurement Pressure Transmitter (Inlet / Outlet) Range: 0 to 16 bar
Temperature Measurement RTD with Temperature Transmitter Range: 0 to 100°C (class A)
Damping Tank Capacity 100 liters; MOC: MS Powder Coated inside, epoxy coated
Collection Tank & Weighing Scale (IND 360 WITH PROFINET COMMUNICATION) A 25 Liters Collection Tank mounted on a 30 Kg Weighing Scale (Resolution: 5 g)
A 125 Liters Collection Tank mounted on a 30 Kg Weighing Scale (Resolution: 20 g)
Optical Heads / Optical Probes Suitable Probes or communications cables will be provided for getting the test meter reading in automode. (Pending) – Pulse/RS485
Endurance

Endurance

Orientation

Orientation

Accuracy

Reverse Flow

Reverse Flow

Temperature

Temperature

Static Pressure

Flow Disturbance

Flow Disturbance

Position Change

Position Change

Pressure Loss

FAQs

1. What is a Calibration Bench for Domestic Water Meters?
A calibration bench is a specialized system designed to validate domestic water meters’ performance in terms of accuracy, durability, and compliance against standards such as BIS 779 and ISO 4064.
2. What tests can be performed using the calibration bench?
The bench supports 9 calibration tests: accuracy, endurance, orientation, reverse flow, static pressure, temperature, flow disturbance, pressure loss, and position change. If you require additional or custom tests, we can discuss them.
3. Which water meter sizes are supported?
The system is configured for domestic meters ranging from DN 15 to DN 25, covering commonly used residential water meter sizes. It accommodates single jet, multi jet, electromagnetic, and ultrasonic types.
4. Who should use this calibration service?
This solution is ideal for water meter manufacturers, certification agencies, R&D labs, and municipal utilities seeking validation, verification, or periodic calibration of their water meters.
Enquire Now







    Nagman Complex, No. 168/7, Chennai-Bangalore NH-4, Chembarambakkam,
    Chennai – 600 123.
    Tamil Nadu, INDIA.

    An ISO 9001:2015 Certified Instrumentation Company

    Products

    Systems

    Contact Info

    Copyright © 2025 Nagman | All Rights Reserved | Developed by

      Request a Quote

      Tell us what you need to measure or calibrate. Share the essentials now; add technical details if you have them.

      Add technical details (optional)

      * Required. Your details will be used to respond to this enquiry.

      Request a Quote